Generator And ATS Planned Maintenance
Inspection
- Check engine oil and coolant for proper levels and condition.
- Check air filter and crankcase breathers. Replace with customer’s approval (Add. Cost)
- Check and adjust belts as required.
- Check genset for loose, bare broken wiring or connections.
- Check governor operation, stability linkage and oil.
- Check fuel tanks, pumps and lines for leaks or damage.
- Check engine, heaters, radiator, hoses and heat exchanger for leaks and condition.
- Check inlet screen if water is supplied other than a radiator.
- Check condition of batteries (load test) electrolyte level and charge rate.
- Start and run engine, check temperatures and pressures.
- Check unit for proper frequency/speed, voltage and amperage.
- Submit a report to owner, and advise of any further work required.
- ATS Inspection with complete IR Thermography scan and report. Transfer Test upon customer approval.
Full Service (Annual)
- Replace engine lubricating oil and remove used oil from premises.
- Replace oil, fuel and coolant filters, add corrosion inhibitor as needed.
- Replace lube oil in hydraulic governors (if applicable.)
- Natural Gas/LPG fueled engines – check all Ignition Systems. Replace parts, when necessary, with customer’s approval
- Check air filter and crankcase breathers. Replace with customer’s approval. (Additional cost)
- Check and adjust belts as required.
- Check genset for loose, bare broken wiring or connection.
- Check governor operation, stability, linkage and oil.
- Check fuel tanks, pumps and lines for leaks or damage.
- Check engine, heaters, radiator, hoses and heat exchanger for leaks and condition.
- Check inlet screen if water is supplied other than a radiator.
- Check condition of batteries electrolyte level and charge rate.
- Start and run engine, check temperatures and pressures.
- Check unit for proper frequency/speed, voltage and amperage.
- Submit a report to owner, and advise of any further work required.
Expert Technicians for Power Generator Repair
Native Power Systems is your trusted resource for Power Generator Repair. Our knowledgeable sales and service staff is available round the clock to solve any issue regarding your standby power system. We are able to provide the most advanced emergency power systems on the market – along with the experience, dedication and knowledge to ensure your system will be in top working condition in a power emergency.
Power Generators We Repair and Service
Native Power Systems provides Full-Service Repair & Preventative Maintenance by our factory trained technicians for residential, light commercial, Industrial generators.
• Generac Generac Generators.
• Caterpillar Caterpillar Generators.
• Cummins Onan Cummins Onan Generators.
• Kohler Kohler Generators.
• Kwiet Power Kwiet Power.
Services Provided
• Emergency Power Docking Station (Required NEC 700.3 (F))
• Power Gen Networking for SCADA & BMS systems
• Generator Remote Monitoring System Sales
• ComAmp Control Install
• Deep Sea Electronics Controller Install
• New Generator Turn Key Install
• Fuel Tank Cleaning
• Fuel Polishing
• Fuel Tank
• Generator enclosure
• Remote Thermal Monitoring Systems
• ATS & Switchgear PM Svc
• UPS Sales & Service
• Remote Mini Grid Power Hybrid Systems